The MCM260X-4AD is a CANbus and Modbus digital input and relay output module. The MCM260X-4AD has 8 PNP input channels and 8 relay outputs with normally open contacts. The contact load is up to 5 Amps and has a common input. The 4AD can be purchased and later changed with the aid of DIP switches between a CANbus device or a Modbus device. In the CANbus mode, the MCM260X-4AD is able to operate at a speed of 1 Mbit/sec on the CANopen network in the Modbus Slave mode it can operate at a 57600 Baud rate. LED's indicate the input and output status for each of the digital input/outputs.
The MCM260X-4AD is small in size and is DIN rail mounted.
Relay Output | 8 Relays 5 Amp. |
Input Digital | 8 Channels PNP. |
Power Supply | 12...24Vac/Vdc. |
Power Consumption | 20VA max. |
Temperature Range | Operative-32°F +113°F -0°C +45°C |
Humidity | (non condensing) 35-95%. |
Housing | DIN Rail |
Dimensions | 3.5" x 2.8" x 2.3",
90 x 71 x 58 mm |
Weight | 14 oz 460 g |
EMC | For industrial environments. |
Immunity: EN 61000-6-2. | |
Emission: EN 61000-6-4. | |
Configuration | PC Configurable, USB. |
Power Supply | |
Positive 12...24Vdc | Terminal 1 |
Negative | Terminal 2 |
Digital Input | |
Input 1 | Terminal 18 |
Input 2 | Terminal 19 |
Input 3 | Terminal 20 |
Input 4 | Terminal 21 |
Input 5 | Terminal 22 |
Input 6 | Terminal 23 |
Input 7 | Terminal 24 |
Input 8 | Terminal 25 |
Relay Output | |
Output 1 Normally Open | Terminal 4 |
Output 2 Normally Open | Terminal 5 |
Output 3 Normally Open | Terminal 6 |
Output 4 Normally Open | Terminal 7 |
Output 5 Normally Open | Terminal 8 |
Output 6 Normally Open | Terminal 9 |
Output 7 Normally Open | Terminal 10 |
Output 8 Normally Open | Terminal 11 |
Common | Terminal 12 |